2019 Ford E350 Lug Nut Torque Specs

What is the wheel lug nut torque setting for a 2019 Ford E350?

140 Ft-Lbs (190 N·m)

When do you need this information?

Whether you are changing a flat tire, you are swapping a wheel, or any type of work that requires you to remove the wheel on your 2019 Ford E350, it is important that you use the manufacturer's recommended wheel nut torque for your vehicle. To properly tighten your wheel nuts to the manufacturer's recommended specs - 140 Ft-Lbs (190 N·m) - you will need an accurate and properly calibrated torque wrench. Please make sure that the wheel nuts or bolts are torqued while the wheel is "in the air" but the vehicle has been lowered, which means the wheel has to be as close to the ground as possible, almost touching the ground or pavement (use wheel chokes to stop the wheel from spinning when torquing the wheel nuts or bolts). This is to ensure proper torque reading and wheel setting.

WARNING! Not using the proper jacking equipment, tools, and proper wheel lug nut or bolt torquing technique, might result in serious injury and vehicle damage! Proper lug nut or bolt torque is very important to ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and reinstalled on the vehicle, the lug nuts/bolts should be torqued using a properly calibrated torque wrench using a high quality six sided (hex) deep wall socket. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts / bolts are properly seated against the wheel.

The wheel nut torque setting presented on this page has been collected from the Owner's Manual for your 2019 Ford E350, published by Ford Canada.

Sparky Express provides the following services for 2019 Ford E350: battery boost (car jump-start), car lockout (locked keys in car), flat tire, fuel delivery, seasonal tire change and car battery replacement.