Recommended wheel lug nut torque settings for Pontiac, all models.
If you are planning on installing a wheel on your Pontiac, it is important to be aware of the manufacturer's recommended torque settings. Using the proper torque helps ensure that the wheel assembly is securely installed.
Using the manufacturer's recommended torque also helps guarantee that there isn’t either too much or too little pressure on any of the assemblies to which the wheel attaches. Before you install your wheels, check your vehicle’s recommended torque.
Pontiac Wheel Bolt Settings Chart
| Make | Model | Trim | Year Range | Torque |
|---|---|---|---|---|
| 6000 | 2/4 DOOR / ALL/5-115 | 1984 - 1991 | 100 ft-lbs | |
| AZTEK | 15-INCH / AWD | 2001 - 2005 | 100 ft-lbs | |
| BONNEVILLE | 14" BASE / LE/SE | 1988 - 2005 | 100 ft-lbs | |
| FIERO | 2/DOOR / BASE | 1984 - 1988 | 100 ft-lbs | |
| FIREBIRD | 14" BASE / TRANS AM | 1985 - 2002 | 100 ft-lbs | |
| FIREBIRD | COUPE / BASE | 1970 - 1981 | 80 ft-lbs | |
| G3 | 14"BASE / BASE | 2009 - 2009 | 90 ft-lbs | |
| G5 | 16-INCH / BASE | 2007 - 2009 | 100 ft-lbs | |
| G6 | 17-INCH / GT | 2005 - 2010 | 100 ft-lbs | |
| G8 | 18"BASE / BASE | 2008 - 2009 | 125 ft-lbs | |
| GRAND AM | CPE/SDN / LE/SE | 1985 - 2005 | 100 ft-lbs | |
| GRAND PRIX | 14" BASE / CPE/SDN | 1985 - 2008 | 100 ft-lbs | |
| GTO | 17-INCH / COUPE | 2004 - 2006 | 100 ft-lbs | |
| GTO | ALL / COUPE/CONV | 1964 - 1972 | 80 ft-lbs | |
| LEMANS | 3 DOOR / LE/VL | 1988 - 1993 | 65 ft-lbs | |
| MONTANA | ALL / ALL | 1999 - 2006 | 100 ft-lbs | |
| SOLSTICE | 18-INCH / ALL | 2006 - 2009 | 100 ft-lbs | |
| SUNBIRD | 13" BASE / LE | 1985 - 1994 | 100 ft-lbs | |
| SUNFIRE | 2/DOOR / GT | 1995 - 2005 | 100 ft-lbs | |
| TORRENT | 16-INCH / FWD | 2006 - 2009 | 100 ft-lbs | |
| TRANSSPORT | 14" BASE / VAN | 1990 - 1998 | 100 ft-lbs | |
| VIBE | 16-INCH / HATCHBACK | 2003 - 2010 | 80 ft-lbs | |
| VIBE GT | 16-INCH / HATCHBACK | 2003 - 2006 | 80 ft-lbs |