2001 Acura 3.2 CL Spare Tire Location, At A Glance The spare tire in your 2001 Acura 3.2 CL is located under the trunk floor, your trunk (luggage compartment). How to access: Open the trunk. Raise the trunk floor mat and the trunk floor by lifting up on the back edge. Take the tool kit out of the trunk. Unscrew the wing bolt and take the spare tire out of its well.
2001 Acura 3.2 CL Emergency Towing Procedures - At A Glance If your 2001 Acura 3.2 CL needs to be towed, call a professional towing service or, if you belong to one, an organization that provides roadside assistance. Never tow your car behind another vehicle with just a rope or chain. It is very dangerous. There are three popular types of professional towing equipment. Flat-Bed Equipment. The operator loads your car on the back of a truck. This is the best way to transport your 2001 Acura 3.2 CL. Wheel-Lift Equipment. The tow truck uses two pivoting arms that go under the tires (front or rear) and lift them off the ground. The other two tires remain on the ground. This...
2001 Acura 3.2 CL Battery Specs & Location Details Confirm these car battery recommendations for your 2001 Acura 3.2 CLL, with your local battery retailer to ensure proper fitment. Group Size: 24 Minimum Cold Cranking Amps: 550 Battery Location: Engine Compartment Definition of Group Size: The Battery Council International (BCI) assigns numbers and letters to common car battery types. These numbers and letters are standards for maximum container size, location and type of terminal and special container features. Definition of Cold Cranking Amps (CCA): A rating used in the battery industry to define a battery’s ability to start an engine in cold temperatures. The higher the CCA rating, the greater the starting power of the battery.
2001 Acura NSX Lug Nut Torque Information If you are planning on installing a wheel on your 2001 2001 Acura NSX, it is important to be aware of the manufacturer recommended wheel nuts torque setting of 108 N·m (11 kgf·m , 80 lbf·ft). Using the proper wheel nut torque helps ensure that the wheel assembly is securely installed. Using the manufacturer recommended torque also helps guarantee that there isn’t either too much or too little pressure on any of the assemblies to which the wheel attaches. Before you install your wheels, check your vehicle’s recommended torque.