Wiki Auto Blog — Ram RSS



Jump Starting A 2019 Dodge Ram 1500

Jump Starting A 2019 Dodge Ram 1500 Safely If your vehicle has a discharged battery, it can be jump started using a set of jumper cables and a battery in another vehicle, or by using a portable battery booster pack. Jump starting can be dangerous if done improperly, so please follow the procedures in this article carefully. Warning! Do not attempt jump starting if the battery is frozen. It could rupture or explode and cause personal injury. Caution! Do not use a portable battery booster pack or any other booster source with a system voltage greater than 12 Volts or damage to the battery, starter motor, alternator or electrical system may occur. Note: When using a portable battery booster pack, follow the...

Continue reading



Ram Wheel Lug Nut Torque Chart

Ram Wheel Lug Nut Torque Specs, All Models If you are planning on installing a wheel on your Ram, it is important to be aware of the manufacturer's recommended torque settings. Using the proper torque helps ensure that the wheel assembly is securely installed. The Ram Trucks Wheel Lug Nut Torque Chart we have compiled can be used as a quick reference guide by roadside assistance providers or DIY enthusiasts when working on any Ram Truck. Using the manufacturer's recommended torque also helps guarantee that there isn’t either too much or too little pressure on any of the assemblies to which the wheel attaches. Before you install your wheels, check your vehicle’s recommended torque. Ram Wheel Lug Nut Torque Specs Recommendations...

Continue reading




2020 Dodge Ram ProMaster City Lug Nut Torque Setting

What is the wheel lug nut torque setting for a 2020 Dodge Ram ProMaster City? 63 Ft-Lbs (86 N·m) Steel Wheels Only 89 Ft-Lbs (120 N·m) Aluminum Wheels Only When do you need this information? Whether you are changing a flat tire, you are swapping a wheel, or any type of work that requires you to remove the wheel on your 2020 Dodge Ram ProMaster City, it is important that you use the manufacturer's recommended wheel nut torque for your vehicle. To properly tighten your wheel nuts to the manufacturer's recommended specs - 63 Ft-Lbs (86 N·m) steel wheels only, 89 Ft-Lbs (120 N·m) aluminum wheels only - you will need an accurate and properly calibrated torque wrench. Please make...

Continue reading