Wiki Auto Blog — Toyota RSS



Toyota Corolla Hybrid Jump Start Step-By-Step Guide

Toyota Corolla Hybrid Jump Start Procedure If the 12-volt battery is discharged the following procedures may be used to start the hybrid system if the 12-volt battery is discharged. You can also call your Toyota dealer or a qualified roadside assistance service. Restarting (jump starting) the Toyota Corolla hybrid system. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below. Confirm that the electronic key is being carried. When connecting the jumper (or booster) cables, depending on the situation, the alarm may activate and doors locked.  Open the hood. Connect a positive jumper cable clamp to (A) on your vehicle and...

Continue reading



Toyota Camry Hybrid Jump Start Step-By-Step Guide

Toyota Camry Hybrid Jump Start Procedure If the 12-volt battery is discharged in your Toyota Camry Hybrid, the following jump start procedures may be used to start the hybrid system if the vehicle’s 12-volt battery is discharged (from Toyota Camry Hybrid Onwer's Manual). You can also call your Toyota dealer or a roadside assistance service that can handle hybrid jump starts. Restarting (jump starting) the Toyota Camry Hybrid System If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below" Confirm that the electronic key is being carried. When connecting the jumper (or booster) cables, depending on the situation, the alarm may activate...

Continue reading



Toyota RAV4 Hybrid Jump Start Procedure

Toyota RAV4 Hybrid Jump Start Procedure, Do It Right! If the 12-volt battery is discharged in your Toyota RAV4 Hybrid The following procedures may be used to start the hybrid system if the vehicle’s 12-volt battery is discharged. You can also call your Toyota dealer or a qualified battery roadside assistance service that can safely perform the Toyota RAV4 jump start procedure on your vehicle. Restarting the Toyota RAV4 Hybrid System If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following these steps: Toyota RAV4 Hybrid vehicles with alarm: Confirm that the electronic key is being carried, because when connecting the jumper (or booster)...

Continue reading



Toyota Yaris Lug Nut Torque Settings

What is the lug nut torque setting for Toyota Yaris? When installing a wheel on your Toyota Yaris, you must torque the lug nuts to the manufacturer's recommended lug nut torque of 76 ft-lb, or 103 Nm (you can go as high as 80 ft-lb).  To properly tighten your wheel nuts to the manufacturer's recommended specs of 76 Ft-Lbs (103 Nm), you will need an accurate and properly calibrated torque wrench. Please make sure that the wheel nuts or bolts are torqued while the wheel is "in the air" but the vehicle has been lowered, which means the wheel has to be as close to the ground as possible, almost touching the ground or pavement (use wheel chokes to stop...

Continue reading



Toyota Tundra Lug Nut Torque Settings

What is the lug nut torque setting for Toyota Tundra? When installing a wheel on your Toyota Tundra, you must check your owner's manual for the exact torque. Toyota Tundra lug nut torque settings varies by submodel, type of wheel used, year and trim, between 85 ft-lb and 150 ft-lb.  To properly tighten your wheel nuts to the manufacturer's recommended specs (between 85 ft-lb and 150ft-lb depending on year/submodel/trim/type of wheel - please always check your Toyota Tundra Owner manual for the exact setting!) you will need an accurate and properly calibrated torque wrench. Please make sure that the wheel nuts or bolts are torqued while the wheel is "in the air" but the vehicle has been lowered, which means the...

Continue reading