Auto Blog — Volvo RSS

Battery Jump Starting Volvo Trucks VN, VHD

Can't Start Your Volvo Truck VN or VHD? If you are driving a Volvo VN or VHD Truck and you cannot start your truck because the batteries are drained or dead, there are a series of steps and some technical information that you should be aware of before attempting to jump-start your Volvo truck. Warnings Before working on your Volvo truck, set the parking brakes, place the transmission in neutral, and block the wheels. Failure to do so can result in unexpected vehicle movement and can cause serious personal injury or death. Do not use a "Hot Shot" type starting cart, as most use extremely high voltages. The use of the "Hot Shot" device to jump-start the vehicle will seriously...

Continue reading

Volvo Wheel Lug Nut Torque Chart

Recommended wheel lug nut torque settings for Volvo, all models. If you are planning on installing a wheel on your Volvo, it is important to be aware of the manufacturer's recommended torque settings. Using the proper torque helps ensure that the wheel assembly is securely installed. Using the manufacturer's recommended torque also helps guarantee that there isn’t either too much or too little pressure on any of the assemblies to which the wheel attaches. Before you install your wheels, check your vehicle’s recommended torque. Volvo Wheel Lug Nut Torque Settings Chart Make Model Trim Year Range Torque VOLVO 240 2/4 DOOR / SEDAN 1985 - 1991 65 ft-lbs 240 2/4 DOOR / SEDAN 1992 - 1993 85 ft-lbs 740 4/DOOR...

Continue reading