Wiki Auto Blog — Wheel Specs RSS



2019 BMW M2 Wheel Bolt Torque Specs

2019 BMW M2 Wheel Bolt Torque Specs (all sub-models). If you are planning on installing a wheel on your 2019 BMW M2, it is important to be aware of the manufacturer's recommended torque settings. Using the proper torque on your BMW's wheels, helps ensure that the wheel assembly is securely installed. Using the manufacturer's recommended torque also helps guarantee that there isn’t either too much or too little pressure on any of the assemblies to which the wheel attaches. Before you install your wheels, check your vehicle’s recommended torque. 2019 BMW M2 Wheel Bolt Torque Specs - Table MAKE MODEL THREAD TORQUE BMW 2019 BMW M2 M14x1.25 140 Nm / 105 Ft-Lbs 2019 BMW M2 Wheel Bolt Torque Specs -...

Continue reading



Retorque Your Wheels - Introducing A New Service

Retorque Your Wheels For Safe Driving And Peace Of Mind! Have you had any type of service done on your wheels? "Retorque" means re-tightening your wheel lug nuts or bolts to the manufacturer's recommended specs. Our mobile retorque service can be requested at home. Instead of driving your vehicle to a shop, you can simply call Sparky Express to come over and retorque your wheels. Planning a long trip with your vehicle? Again, it might be a good idea to ensure that your wheels' lug nuts (or bolts) are properly torqued, and the tires are properly inflated. You can save a lot of time with our retorque service, we will come to your location, inspect your wheels, retorque them, and...

Continue reading



Toyota Yaris Lug Nut Torque Settings

What is the lug nut torque setting for Toyota Yaris? When installing a wheel on your Toyota Yaris, you must torque the lug nuts to the manufacturer's recommended lug nut torque of 76 ft-lb, or 103 Nm (you can go as high as 80 ft-lb).  To properly tighten your wheel nuts to the manufacturer's recommended specs of 76 Ft-Lbs (103 Nm), you will need an accurate and properly calibrated torque wrench. Please make sure that the wheel nuts or bolts are torqued while the wheel is "in the air" but the vehicle has been lowered, which means the wheel has to be as close to the ground as possible, almost touching the ground or pavement (use wheel chokes to stop...

Continue reading



Toyota Sequoia Lug Nut Torque Setting

What is the lug nut torque setting for Toyota Sequoia? When installing a wheel on your Toyota Sequoia, you must torque the lug nuts to the manufacturer's recommended lug nut torque of: 2008-2021 Toyota Sequoia Models: 97 ft-lb, or 132 Nm (you can go as high as 100 ft-lb). 2001-2007 Toyota Sequoia Models: 83 ft-lb, or 113 Nm (you can go as high as 85 ft-lb). To properly tighten your wheel nuts to the manufacturer's recommended specs of 97 Ft-Lbs (132 Nm) for 2008-2021 models or 83 ft-lb (113 Nm) for 2001-2007 models, you will need an accurate and properly calibrated torque wrench. Please make sure that the wheel nuts or bolts are torqued while the wheel is "in the air" but the...

Continue reading



Toyota Mirai Lug Nut Torque

What is the lug nut torque setting for Toyota Mirai? When installing a wheel on your Toyota Mirai, you must torque the lug nuts to the manufacturer's recommended lug nut torque of 76 ft-lb, or 103 Nm (you can go as high as 80 ft-lb).  To properly tighten your wheel nuts to the manufacturer's recommended specs of 76 Ft-Lbs (103 Nm), you will need an accurate and properly calibrated torque wrench. Please make sure that the wheel nuts or bolts are torqued while the wheel is "in the air" but the vehicle has been lowered, which means the wheel has to be as close to the ground as possible, almost touching the ground or pavement (use wheel chokes to stop...

Continue reading