Toyota Tundra Lug Nut Torque Settings


What is the lug nut torque setting for Toyota Tundra?

When installing a wheel on your Toyota Tundra, you must check your owner's manual for the exact torque. Toyota Tundra lug nut torque settings varies by submodel, type of wheel used, year and trim, between 85 ft-lb and 150 ft-lb. 

To properly tighten your wheel nuts to the manufacturer's recommended specs (between 85 ft-lb and 150ft-lb depending on year/submodel/trim/type of wheel - please always check your Toyota Tundra Owner manual for the exact setting!) you will need an accurate and properly calibrated torque wrench. Please make sure that the wheel nuts or bolts are torqued while the wheel is "in the air" but the vehicle has been lowered, which means the wheel has to be as close to the ground as possible, almost touching the ground or pavement (use wheel chokes to stop the wheel from spinning when torquing the wheel nuts or bolts). This is to ensure proper torque reading and wheel setting.

For safety reasons, in order to avoid vehicle damage or personal injury, proper lifting equipment is required when torquing the lug nuts on your Toyota Tundra. Only use the jacking points indicated in your Toyota Tundra Owner Manual, and always activate the emergency brake before jacking the car. In addition, use jackstands properly placed under your vehicle when leaving the car suspended for a while, or if you have to get under the car for any reason.

Do not over-torque or under-torque the lug nuts on your Toyota Tundra!

If you require roadside assistance for your Toyota Tundra, we can help! The following services are available from Sparky Express in Toronto GTA area:

Sparky Express is an independent, on-demand roadside assistance provider. Our roadside assistance services are available for booking online, or via telephone.